Calibration of Discrete Element Method Contact Parameters and Development of a Bonded Model for Walnut Cake Flakes
Keywords:
DEM, Response surface methodology, Angle of repose, Bonding V2, Parameter calibrationAbstract
Cold-pressed walnut cake flakes, a by-product of walnut processing, have considerable potential for valorization. However, research has focused largely on their biochemical properties, with limited attention to their warped morphology and susceptibility to brittle fracture. These research gaps, together with difficulties in measuring contact and mechanical parameters, hinder the structural design and optimization of crushing equipment. Here, the equivalent coefficient of rolling friction was measured using a modified incline-plane method, and contact parameters for the Hertz-Mindlin (no slip) model were calibrated using response surface methodology, with the angle of repose as the response variable. A meta-particle model incorporating a truss-like force-chain structure was developed and coupled with the Bonding V2 model to identify a set of bonding parameters that reproduced the fracture response. The calibrated normal stiffness per unit area, shear stiffness per unit area, normal strength, and shear strength were 4.91 × 1011 N/m3, 7.71 × 109 N/m3, 2.66 × 106 Pa, and 7.04 × 105 Pa, respectively. The relative errors between simulated and measured values were below 5% for angle of repose, fracture force, and fracture displacement. This study provides an analytical method and reference parameters for the design and optimization of equipment for crushing walnut cake flakes.