Fractionation of Softwood Lignin and Polysaccharides By n-Butanol/Maleic Acid Two-Solvent Process

Abstract

The organosolv method, using water and n-butanol with acid catalysts, separates biomass into three phases: n-butanol, aqueous, and solid, which primarily contain lignin, hemicellulose, and cellulose, respectively. In this study, maleic acid was applied as a catalyst in the water/n-butanol method to avoid using inorganic acids. Comparable or better component separation was achieved relative to using sulfuric acid as a catalyst. Furthermore, by using a high concentration of maleic acid, instead of a catalytic amount, lignin was extracted from softwood with a high yield (more than 97 wt.% lignin extracted) under the condition at 180 °C for 1 hour with approximately 10 wt% maleic acid. Additionally, the reaction temperature and time were varied to achieve better lignin fractionation and functionalization. The highest total fractionation extent and well-carboxylated lignin were obtained at 150 °C. The chemical properties of lignin were also analyzed, and their structure and molecular weight were investigated.