Fundamental Natural Frequency and Floor Impact Sound Insulation Performance of CLT Slabs Based on Wood Species and Panel Connections: An Experimental Study

Abstract

The effects of wood species and panel connections on the vibration and heavy-weight impact sound insulation performance of cross-laminated timber (CLT) slabs were investigated. CLT panels (5-ply, 150 mm thick, 1 m wide, and 4.2 m long) made of larch (Larix kaempferi) and pine (Pinus densiflora) were manufactured with 30 mm thick laminae, considering three types of joints. Three CLT panels of the same species and joint type were connected using spline joints, butt joints, or half-lap joints to form 3 m wide and 4.2 m long slabs for testing. The floor impact sound insulation performance of the CLT slabs was measured according to KS F ISO 10140-3, using the standard heavy-weight impact source, a rubber ball. Additionally, four accelerometers were installed at 400 mm intervals beneath the CLT slabs to analyze the deflections and natural frequencies of the slabs. The results of the experiment indicated that there were no significant differences depending on the wood species and the CLT panel joints. These findings suggest that wood species and joint methods can be flexibly applied in the design of CLT slabs.